doi:

DOI: 10.3724/SP.J.1037.2013.00428

Acta Metallurgica Sinica (金属学报) 2013/49:12 PP.1543-1548

THEORETICAL ANALYSIS OF AN ABRUPT INCREASE IN GROWTH RATE ON THE DIRECTIONALLY SOLIDIFIED MICROSTRUCTURES OF OFF-EUTECTIC ALLOYS


Abstract:
Coupled growth eutectic microstructures at an abrupt increase in growth rate in directional solidification of off eutectic alloys have been analyzed based on the maximum interface growth temperature criteria. The abrupt growth rate possibly required for the growth of coupled eutectics during the abrupt increase in growth rate is obtained by considering the competitive growth between the eutectic and primary dendrites. The theoretical predictions show that the eutectics can grow out of coupled zone, differing from the conventional eutectic solidification concept that indicates the entirely coupled eutectics only form within the coupled zone. In addition, the theoretical analysis are employed in two kinds of regular eutectics such as lamellar eutectic in the A1-40%Cu hypereutectic alloy and rod eutectic in the A1-12%Ni hypereutectic alloy; a good agreement between the theoretical calculation results and reported experimental data has been achieved.

Key words:directional solidification,eutectic alloy,coupled growth,dendrite,abrupt increase in growth rate

ReleaseDate:2015-03-06 17:47:00



[1] Liu S, Lee J H, Trivedi R. Acta Mater, 2011:59:3102.

[2] Parisi P, Plapp M. Acta Mater, 2008:56:1348.

[3] Shankar S, Riddle Y W, MakhlouF M M. Acta Mater, 2004:52:4447.

[4] Fu H Z, Guo J J, Liu L, Li J S. Directional Solidification and Processing of Advanced Materials. Beijing:Science Press, 2008:282(傅恒志,郭景杰,刘林,李金山.先进材料定向凝固.北京:科学出版社,2008:282)

[5] Bei H, George E P, Kenik E A, Pharr G M. Acta Mater,2003:51:6241.

[6] Li S M, Ma B L, Li X X, Liu L, Fu H Z. Sci China, 2005:48E:270

[7] Li S M, Song Y P, Ma B L, Tang L, Fu H Z. Mater Sci Eng, 2008:A475:117.

[8] Li S M, Quan Q R, Li X L, Fu H Z. J Crystal Growth,2011:314:279.

[9] Peng P, Li X Z, Liu D M, Su Y Q, Guo J J, Fu H Z. Acta Metall Sin, 2013:49:311(彭眺,李新中,刘冬梅,苏彦庆,郭景杰,傅恒志.金属学报,2013:49:311)

[10] Hunziker O, Vandyoussefi M, Kurz W. Acta Mater, 1998:46:6325.

[11] Kurz W, Fisher D J. Fundamentals of Solidification. 4th Ed., Zurich:Trans Tech Publication, 1998:261

[12] Trivedi R, Kurz W. In:Stefanescu D M, Agaschian G J, Bayuzik R J, eds., Solidification Processing of Eutectic Alloys. Warrendale, PA:TMS/AIME, 1988:3

[13] Dantzig J A, Rappaz M. Solidification. Swiss:EPFL Press, 2009:354

[14] Seetharaman V, Trivedi R. In:Stefanescu D M, Agaschian G J, Bayuzik R J, eds., Solidification Processing of Ev,tectic Alloys. Warrendale, PA:TMS/AIME, 1988:65

[15] Zhao P, Li S M, Fu H Z. Acta Metall Sin, 2012:48:33(赵朋,李双明,傅恒志.金属学报,2012:48:33)

[16] Kurz W. Adv Eng Mater, 2001:3:443.

[17] Hu H (a. Pandamental of Metals Solidification. 2nd Ed.,Beijing:China Machine Press, 2002:120(胡汉起.金属凝固原理.第2版,北京:机械工业出版社,2000:120)

[18] Lee J H, Liu S, Trivedi R. Metall Mater Trans, 2005:36A:3111.

[19] Tourret D, Gandin C A. Acta Mater, 2009:57:2066.

[20] Gill G C, Kurz W. Acta Metall Mater, 1993:41:3563.