doi:

DOI: 10.3724/SP.J.1089.2010.11137

Journal of Computer-Aided Design & Computer Graphics (计算机辅助设计与图形学学报) 2010/22:9 PP.1570-1577

Lookahead and Acceleration-Deceleration Algorithms for Micro-Line Blocks Machining


Abstract:
In micro-line blocks machining with real-time curve reconstruction, the original contour of workpieces usually can not be reconstructed accurately, and the contour errors of the reconstructed curves exceeds the allowable limit of contour error. Curve reconstruction conditions, including corner angle condition which depends on allowable feedrate of the corner angle, chord length condition which is based on correlated change of the corner angles and chord lengths of successive micro-line blocks are given. A feedrate profile planning algorithm across the knots of the reconstructed curve with S-shape acceleration-deceleration(acc.dec) is presented in lookahead and acc/dec algorithm. Simulations and experiments using these new methods show that the maximum contour error between the reconstructed curve and the micro-lines is less than the permissible contour error set in CAM software for segmenting the original curve into the micro-line blocks, and the machining speed is 1.5~3.3 times the speed of traditional machining process. The results indicate that by using the new algorithms, geometry elements of original contour of workpieces can be distinguished from NC code effectively, and the base points can be found, so the original contour of workpieces can be reconstructed accurately, and the interpolation points pass every knot of the reconstructed curve precisely. The method discussed has application in complex contour machining and designing middle or high grade CNC.

Key words:micro-line blocks machining,curve reconstruction,look ahead,S-shape-acceleration-deceleration

ReleaseDate:2014-07-21 15:25:54



[1] Cui J, Chu Z Y. An improved approach for the acceleration and deceleration of industrial robots and CNC machine tools[C]// Proceedings of IEEE International Conference on Industrial Technology, Hong Kong, 2005: 1269-1273

[2] Ye Peiqing, Zhao Shenliang. Study on control algorithm for micro-line continuous interpolation[J]. China Mechanical Engineering, 2004, 15(15): 1354-1356 (in Chinese) (叶佩青, 赵慎良. 微小直线段的连续插补控制算法研究[J]. 中国机械工程, 2004, 15(15): 1354-1356)

[3] Xu Zhiming, Feng Zhengjin, Wang Yongsheng,et al. High-speed adaptative look-ahead interpolation algorithm for continuous micro path sections[J]. Manufacturing Technology & Machine Tool, 2003(12): 20-23 (in Chinese) (徐志明, 冯正进, 汪永生, 等. 连续微小路径段的高速自适应前瞻插补算法[J]. 制造技术与机床, 2003(12): 20-23)

[4] Yang Kaiming, Shi Chuan, Ye Peiqing,et al. Smooth transfer control algorithm for continuous segment trajectory in computer numerical control systems [J]. Journal of Tsinghua University: Science and Technology, 2007, 47(8): 1295-1299 (in Chinese) (杨开明, 石 川, 叶佩青, 等. 数控系统轨迹段光滑转接控制算法[J]. 清华大学学报: 自然科学版, 2007, 47(8): 1295-1299)

[5] Leng Hongbin,Wu Yijie, Pan Xiaohong. Velocity planning algorithm for high speed machining of micro line blocks based on the cubic polynomial model[J]. Computer Integrated Manufacturing Systems, 2008, 14(2): 336-340 (in Chinese) (冷洪滨, 邬义杰, 潘晓弘. 三次多项式型微段高速加工速度规划算法研究[J]. 计算机集成制造系统, 2008, 14(2): 336-340)

[6] Wang Yuhan, Xiao Lingjian, Zeng Shuisheng,et al. An optimal feedrate model and solution for high-speed machining of small line blocks with look-ahead[J]. Journal of Shanghai Jiaotong University, 2004, 38(6): 901-904 (in Chinese) (王宇晗, 肖凌剑, 曾水生, 等. 小线段高速加工速度衔接数学模型[J]. 上海交通大学学报, 2004, 38(6): 901-904)

[7] Cao Yunan, Wang Tianmiao, Chen Youdong,et al. Application of pre-interpolation S-shape acceleration-deceleration in CNC look-ahead interpolation algorithm[J]. Journal of Beijing University of Aeronautics and Astronautics, 2007, 33(5): 594-599 (in Chinese) (曹宇男, 王田苗, 陈友东, 等. 插补前S加减速在CNC前瞻中的应用[J]. 北京航空航天大学学报, 2007, 33(5): 594-599)

[8] Xu Chuangwen. Study of accelerating and decelerating control on NC feed system[J]. Chinese Journal of Scientific Instrument, 2002, 23(Suppl.3): 360-362 (in Chinese) (徐创文. 数控进给系统加减速控制研究[J]. 仪器仪表学报, 2002, 23(增刊3): 360-362)

[9] Erkorkmaz K, Altintas Y. High speed CNC system design. Part I: jerk limited trajectory generation and quintic spline interpolation[J]. International Journal of Machine Tools & Manufacture, 2001, 41(9): 1323-1345

[10] Ren Kun, Fu Jianzhong, Chen Zichen. New look-ahead algorithm for velocity control in high speed machining[J], Journal of Zhejiang University: Engineering Science, 2006, 40(11): 1985-1988 (in Chinese) (任 锟, 傅建中, 陈子辰. 高速加工中速度前瞻控制新算法研究[J]. 浙江大学学报: 工学版, 2006, 40(11): 1985-1988)

[11] Yau H T, Wang J B, Chen W C. Development and implementation for real-time lookahead interpolator by using-Bézier curve to fit CNC continuous short blocks [C]// Proceedings of IEEE International Conference on Mechatronics, Taipei, 2005: 78-83

[12] Yau H T, Wang J B. Fast Bézier interpolator with real-time lookahead function for high-accuracy machining[J]. International Journal of Machine Tools & Manufacture, 2007, 47(10): 1518-1529

[13] Li Jiangang, Zhang Tinghua, Li Zexiang,et al. B-Spline fitting of continuous line segments in CNC machining[J]. Journal of Harbin Institute of Technology, 2008, 40(10): 1606-1608 (in Chinese) (李建刚, 张婷华, 李泽湘, 等. 数控加工中的连续多段直线轨迹B-Spline拟合[J]. 哈尔滨工业大学学报, 2008, 40(10): 1606-1608)

PDF