doi:

DOI: 10.3724/SP.J.1077.2009.00491

Journal of Inorganic Materials (无机材料学报) 2009/24:3 PP.491-496

Study on Mechanical Properties and Blood Compatibility of Carbon Nitride Film Deposited on NiTi Alloy


Abstract:
Ti/CNx (x≈0.26), as well as Ti/DLC (Diamond-Like Carbon) and Ti/TiN gradient films were deposited on NiTi alloy substrates using DC (direct current) magnetron sputtering method. The mechanical properties concerning hardness and cohesion of the above three films were tested by using microhardness tester and scratch tester, respectively. The surface hydrophilicities of the three films were measured using contact angle measurement. The blood compatibilities of the substrate and the films were evaluated by hemolysis test and platelet adhesion test. The results indicate that the cohesion between Ti/CNx film and NiTi alloy substrate is excellent (63.6N). The hardness of the CNx film (23.01GPa) is nearly equal to that of the TiN film, which is somewhat higher than that of the DLC films. The results of surface hydrophilicity test and platelet adhesion test demonstrate that the hydrophilicity and blood compatibility of NiTi alloy are improved effectively by the modification with the Ti/CNx film. In comparison with Ti/TiN and Ti/DLC gradient films, Ti/CNx film has the minimum hemolysis ratio of 1.12%. Among the above gradient films, the Ti/CNx film has the best blood compatibilities, as indicated by the minimum amount of conglutinated platelets and the least deformation.

Key words:carbon nitride film,mechanical properties,blood compatibility

ReleaseDate:2014-07-21 14:36:50



[1]Villermaux F, Tabrizian M, Yahia L, et al. Biomedical Materials and Engineering, 1996, 6(4): 241-254.

[2]Liu X Y, Chu P K, Ding C X. Matererials Science and Engineering R, 2004, 47(3-4): 49-121.

[3]Cheng Y, Zheng Y F. Surface and Coatings Technology, 2007, 201(15): 6869-6873.

[4]Sui J H, Cai W. Diamond and Related Materials, 2006, 15(10): 1720-1726.

[5]姜训勇,严 立.功能材料,2004,35Z(1):2373-2375.

[6]祝新发,陈顺民,许 辉. 热处理,2006,21(2):28-30.

[7]Sui J H, Cai W, Zhao L C. Nuclear Instruments and Methods in Physics Research Section B, 2006, 248(1): 67-70.

[8]Myung H S, Park Y S, Hong B, et al. Thin Solid Films, 2006, 506-507: 87-91.

[9]Wang C B, Yang S R, Zhang J. Journal of Non-Crystalline Solids, 2008, 354(15): 1608-1614.

[10]尹 路,郭天文,赵 雯,等.口腔颌面修复学杂志,2007,8(4):287-290.

[11]Yin Y, Hang L, Xu J,et al. Thin Solid Films, 2008, 516(16):5157-5161.

[12]Riascos H, Neidhardt J, Radnóczi G Z, et al. Thin Solid Films, 2006, 497(1-2): 1-6.

[13]郭海霞,梁成浩.上海生物医学工程,2001,22(3): 44-48.

[14]中华人民共和国国家标准-医疗器械生物学评价(GB/T16886-1997).北京:中国标准出版社,1997.

[15]李伯刚,康安福,尹光福,等. 生物医学工程学杂志,2005,22(3): 452-455.

[16]Weng Y J, Hou R X, Li G C, et al. Applied Surface Science, 2008, 254(9): 2712-2719.

[17]Tamada Y,Ikada Y. Polymer,1993, 34(10):2208-2212.

[18]Takemoto S,Yamamoto T,Tsuru K,et al. Biomaterials,2004, 25(17):3485-3492.

PDF